Sheet profiles are used, for example, for shaping the work scaffoldings, workshop floor platforms, carwash equipment, ramps, and facades.
They may be found at industrial sites, traffic, and transport as well. The sheet profiles are the ideal complementary the product range of the known floor coverings which may be approached by vehicles.
Due to their stability and slipping-proof properties, the profiles contribute to the increase of the workplace security. The advantage of the high shape stability is the simple and swift installing.

Manufacturing

The sheet profiles are manufactured from rolls of metal, from different raw materials.
Following the successful inspection the rolls are taken to the CNC controlled production line. There the desired product surface is punched with the appropriate tool and it is pressed and cut to length. When determining the length, it is necessary to pay attention to the fact that the given raster size “R” (see the reference at certain finishes) has to be observed as much as possible. Of course, different measurements are possible, too, but this leads to plus work during manufacturing. In case of the hot-dip galvanized elements the production length should not exceed 6000 mm. The sheet thickness and the production speed should be determined depending on the desired load and the used raw material. The perforated metal sheets are shaped into C-profiles using CNC-controlled moulding technology In case slots, openings have to be placed on the moulded sheet profile sieves, their data are introduced and then they are worked out using the completely integrated system. The sheet profile sieves can be delivered with welded laths. According to the DIN standard this has to be minimum 100 mm higher than the walking level. Following this the elements are galvanized.

BP “parallel” sheet profile

Features

Raw material:

2,0 – 2,5 mm thickness galvanized steel, or

1,5 – 2,0 mm thickness stainless steel, or

2,0 – 2,5 mm thickness aluminium, or

galvanized steel to order.

R: 125 mm raster size

L: possible n x R production length

B: 150, 200, 250, 300, 400 mm width

H: 30, 50, 75, 100 mm height

tu: min. 10 mm rim

The “parallel” sheet profile is popular due to its elegant aesthetics. It is characterized by calm lines and high loading possibility, thus it is recommended for industrial surfaces with large areas.

BPÜ “raised parallel” sheet profile

Features

Raw material:

2,0 – 2,5 mm thickness galvanized steel, or

1,5 – 2,0 mm thickness stainless steel, or

2,0 – 2,5 mm thickness aluminium, or

galvanized steel to order.

R: 125 mm raster size

L: possible n x R production length

B: 150, 200, 250, 300, 400 mm width

H: 50, 75, 100 mm high

tu: min. 10 mm rim

The “raised parallel” sheet profile is popular due to its good non-skid effect and loading capacity.

BNO “open labiated” sheet profile

Features

Raw material:

2,0 – 2,5 mm thickness galvanized steel, or

1,5 – 2,0 mm thickness stainless steel, or

2,0 – 2,5 mm thickness aluminium, or

galvanized steel to order.

R: 62,5 mm raster size

L: possible n x R production length

B: 150, 200, 250, 300 mm width

H: 30, 50, 75, 100 mm height

tu: min. 10 mm rim

 

The “open labiated” sheet profiles offer good drainage due to their drainage holes, and offer outstanding stability due to the high standing edges.

BNG “embossed, closed” sheet profile

Features

Raw material:

2,0 – 2,5 mm thickness galvanized steel, or

1,5 – 2,0 mm thickness stainless steel, or

2,0 – 2,5 mm thickness aluminium, or

galvanized steel to order.

R: 62,5 mm raster size

L: possible n x R production length

B: 150, 200, 250, 300 mm width

H: 30, 50, 75, 100 mm height

tu: kb. 12 mm rim

 

The “embossed, closed” sheet profiles are used in areas where there is a need for closed surface, together with the secure walking surface.

BR “diamond” sheet profile

Features

Raw material:

2,0 – 2,5 mm thickness galvanized steel, or

1,5 – 2,0 mm thickness stainless steel, or

2,0 – 2,5 mm thickness aluminium, or

galvanized steel to order.

R: 125 mm raster size

L: possible n x R production length

B: 150, 200, 250 mm szélesség

H: 30, 50, 75, 100 mm height

tu: kb. 12 mm rim

  

The “diamond” sheet profiles are especially useful in such areas where concentrated load appears on small surfaces (e.g. on surfaces for vehicles).

BZ „fogazott” lemezprofil

Features

Raw material:

2,0 / 2,5 / 3,0 mm vastag fekete/tüzihorganyzott acéllemez, vagy

2,0 / 2,5 / 3,0 mm vastag sendzimir horganyzott acéllemez, vagy

2,5 / 3,0 mm vastag alumínium lemez, vagy

2,0 mm vastag rozsdamentes acéllemez.

R: 30 mm raszterméret

L: possible n x R production length

B: 120, 180, 240, 300, 360, 420, 480 mm szélesség

H: 40, 50, 75, 100 mm magasság

Ladder rungs

”LSP

Marking: 2000/50/39/2 mm
Raw material: stainless steel 1.4301, stainless steel 1.4571, aluminium AlMg3G22
Length: 800 mm
Surface: raw, no coating

”LSP

Marking: 2000/35/34/2 mm
Raw material: stainless steel 1.4301, stainless steel 1.4571, aluminium AlMg3G22
Length: 2000 mm
Surface: raw, no coating

”LSP

Marking: 2000/50/39/2 mm
Raw material: stainless steel 1.4301, stainless steel 1.4571, aluminium AlMg3G22
Length: 2000 mm
Surface: raw, no coating
LSP 50 G: 497/50/39/2 mm egyenes véggel; LSP 50 R: 485/50/39/2 mn a végén kerek kivágással

”LSP

Megjelölés: LSP 30 MG5/1
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2 mm

”LSP

Megjelölés: LSP 30 MG5/3
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2 mm

”LSP

Megjelölés: LSP 30 MG10/1
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2 mm

”LSP

Megjelölés: LSP 80 MDO/2
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2-3 mm

 

”LSP

Megjelölés: LSP 30 G/1
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2-3 mm

”LSP

Megjelölés: LSP 40 Z/1
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2-3 mm

”LSP

Megjelölés: LSP 30 Z2/2
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2 mm

 

”LSP

Megjelölés: LSP 80 ZO/2
Raw material: acél, rozsdamentes acél, előhorganyzott acél
Hosszúság: 300-1000 mm
Lemezvatagság: 2-3 mm

 

The vertical, fixed ladders are widely used: at forges and rolling mills, mines, chemical industry factories and in such areas where secure steps are needed. We offer special ladder rungs for the different usage areas in order to achieve the secure climbing in all cases. Each ladder rung provides good standing security even in extreme working conditions. Due to the surface shaping there is proper non-skid effect and the dirtiness can be avoided. Thus the security demands are fulfilled.